Wood Care

Hardwood vs Softwood for Furniture

The names come from botany, and the hardness overlap may surprise you

November 10, 2026 5 min read
Mirello mid-century solid wood console table in a light oak tone with three drawers and tapered legs beside an armchair
Quick Answer

Hardwood and softwood describe where wood comes from, not how hard it is. Hardwoods come from broadleaf trees such as oak, walnut and teak; softwoods come from conifers such as pine and fir. Most hardwoods are denser and resist dents better, which is why they are favored for tables, but there are soft hardwoods and hard softwoods.

380 lbfEastern white pine (Janka)
1,350 lbfWhite oak (Janka)
BotanyNot hardness, decides the name

"Hardwood" sounds like a promise of strength, and "softwood" sounds like something that will dent if you look at it. The words are older than that. They come from botany, and the hardness overlap between the two groups surprises most people.

Hardwood vs softwood at a glance

Hardwood Softwood
Comes from Broadleaf (flowering) trees Conifers (cone-bearing trees)
Examples Oak, walnut, maple, cherry, teak, saman Pine, fir, spruce, cedar
Typical hardness Medium to high, with exceptions Low to medium, with exceptions
Grain Often richer figure and color Often straight, with visible knots
Growth Usually slower Usually faster
Common furniture use Tables, chairs, cabinets, heirloom pieces Budget furniture, frames, rustic pieces, painted furniture
Mirello mid-century solid wood console table in a walnut tone with three drawers and tapered legs in a bedroom with a lamp and vase
Daily Use

Drawers that open every day

Our Mirello console table has three drawers on tapered legs, 45 to 70 inches wide and 34 inches high, from $2,850. Pieces that get handled daily benefit most from a dense, dent-resistant wood.

Hardness: where the names fall apart

Wood Group Janka hardness
Balsa Hardwood Under 100 lbf, one of the softest woods
Eastern white pine Softwood 380 lbf
Douglas-fir Softwood About 620 lbf
Saman (monkey pod) Hardwood 900 lbf
Black walnut Hardwood 1,010 lbf
Teak Hardwood 1,070 lbf
White oak Hardwood 1,350 lbf
Hard maple Hardwood 1,450 lbf

The Janka test measures the force needed to press a steel ball halfway into the wood. Higher numbers resist dents better. Figures are averages from The Wood Database and match our oak vs walnut and teak vs acacia vs suar guides.

Elmora sculptural solid wood console table with a natural tree branch base and a live edge top holding vases under a wall-mounted TV
Branch Base

A tree under the top

Our Elmora console table rests on a natural branch base, 50 to 79 inches wide, from $3,410.

Which is better for furniture?

Dining tables and desks

  • A dense hardwood.
  • White oak or maple resist dents best.
  • A durable finish on top.

Coffee and console tables

  • Medium hardwoods are fine.
  • Walnut, teak or saman.
  • Coasters still help.

Rustic or painted pieces

  • Softwood can be a good value.
  • Expect dents to add character.
  • Pine and fir paint well.

The same hardness logic applies in the kitchen; see the best wood for cutting boards.

What matters beyond the label

  • Solid wood vs veneer: a hardwood veneer over particleboard is not a solid hardwood piece; see how to tell if furniture is solid wood.
  • Drying: well-dried wood moves less at home.
  • Finish: a good topcoat matters as much as hardness for daily wear.
  • Species name vs finish color: "Oak" or "Walnut" on a product page may describe the color, not the tree.
Ribbon Arc sculptural solid wood coffee table in a natural tone with an arched ribbon base in a bright living room with ocean views
Natural Tone

A ribbon of solid wood

Our Ribbon Arc coffee table curves on an arched base, 34 to 55 inches wide, from $2,190.

What Woodfurnist uses

Woodfurnist pieces are made from natural solid wood, selected by hand in our Da Nang workshop when each order is built, and finished with polyurethane. Some listings name a specific wood, such as our solid saman pieces. "Oak," "Walnut," "Brown" and "Black" in our color options are finish colors on the same solid wood, at the same price; our oak vs walnut guide explains the difference.

Mirello mid-century solid wood console table in a light oak tone with three drawers and tapered legs beside an armchair and a plant
Oak Tone

Same table, lighter finish

The Mirello console table in its Oak finish color. Compare it with the walnut-tone photo above: same piece, different finish.

Key Takeaway

Hardwood comes from broadleaf trees and softwood from conifers; the names are about botany, not strength. Most hardwoods resist dents better, which is why they suit tables and desks, but balsa is a hardwood and some softwoods are fairly hard. Compare Janka numbers, solid wood vs veneer, drying and finish instead of the label alone.

Woodfurnist Design Tip

Press a fingernail gently into the underside of a piece. If it leaves a mark easily, expect the top to show daily wear too, and plan for coasters and felt pads.

Keep Exploring

Browse our tables, read is solid wood furniture worth it, or see wood movement in furniture.

Frequently Asked Questions

What is the difference between hardwood and softwood?

Hardwood comes from broadleaf, flowering trees; softwood comes from conifers. The names describe the tree, not the hardness.

Is hardwood always harder than softwood?

No. Balsa is a hardwood and one of the softest woods, while some softwoods are harder than some hardwoods.

Is hardwood or softwood better for furniture?

For tables and pieces that get daily use, a dense hardwood usually wears better. Softwood can be a good value for rustic or painted pieces.

Is pine a hardwood?

No. Pine is a softwood; eastern white pine averages about 380 lbf on the Janka scale.

What is the hardest common furniture wood?

Among common furniture woods, hard maple and white oak rank near the top, at about 1,450 and 1,350 lbf.

Is walnut a hardwood?

Yes. Black walnut is a hardwood at about 1,010 lbf, softer than oak but prized for its color.

Editor's note: Janka figures are averages from The Wood Database; every board varies. Product sizes and prices were checked on woodfurnist.com on November 10, 2026. Room images are styled product images for inspiration. Every piece is made to order in 7 to 10 business days, plus 5 to 7 business days for free US delivery; see our shipping policy.