Wood Care

Best Wood for Cutting Boards

Hard enough to last, soft enough to keep your knife sharp

November 11, 2026 5 min read
Mapledale live edge solid wood cutting board with a handle holding cheese, tomatoes and blackberries on a pale countertop
Quick Answer

The best woods for a cutting board are dense, closed-grain hardwoods that are hard enough to resist deep cuts but not so hard they dull your knife: hard maple, walnut, cherry and beech are classic choices. Avoid soft or resinous woods like pine, open-grain woods like red oak, and very hard or oily exotics that dull blades.

~900–1,500Janka range most boards fall in (lbf)
ClosedGrain keeps juices on top
Food-safeOil finish, never varnish

A cutting board takes more abuse than any other wood in your home: knives, water, salt, acid and hot pans, every day. The right wood makes the difference between a board that lasts decades and one that warps, stains or dulls your best knife in a year.

What makes a good cutting board wood

  • Hardness in the middle: too soft and it scars deeply; too hard and it dulls your knife.
  • Closed grain: small pores keep juices and food particles on the surface where you can wash them off.
  • Stability: woods that move less with moisture are less likely to warp or crack.
  • Food-safe: common food woods, with no irritating dust or strong resin.

Cutting board woods compared

Wood Janka (lbf) Grain Verdict
Hard maple 1,450 Closed, fine The classic choice: durable, pale, easy on knives
Beech About 1,300 Closed, fine Hard and affordable; moves more with moisture
Teak 1,070 Closed, oily Very water resistant, but its natural silica can dull blades faster
Black walnut 1,010 Medium Kind to knives, hides stains, a little softer
Black cherry 950 Closed, fine Warm color that deepens with age
Red oak 1,220 Very open Not ideal: open pores trap liquid
Eastern white pine 380 Soft, resinous Not ideal: scars deeply, can taste of resin

Janka figures are averages from The Wood Database and match our types of wood for furniture guide.

Mapledale live edge solid wood cutting board with a handle holding cheese and cherries beside crackers on a pale countertop
Live Edge Board

A board that doubles as a platter

Our Mapledale cutting board keeps a natural live edge, 16 to 40 inches wide and 12 inches deep, with or without a handle, from $318.99. It is made from natural solid wood and finished with a food-safe natural oil.

Woods and materials to avoid

Avoid Why
Softwoods like pine and cedar Scar deeply; resins and aromas can transfer to food
Open-grain woods like red oak Large pores hold liquid and are harder to clean
Very hard exotics Wear knife edges quickly; some species irritate skin or lungs when worked
Boards with varnish or lacquer Film finishes chip into food; use oil-finished boards
Glass, stone or marble boards Pretty for serving but very hard on knife edges

Wood or plastic?

Both can be safe when they are cleaned well. A well-kept hardwood board is gentle on knives and lasts for years with oil. Plastic boards can go in the dishwasher but develop deep grooves that are hard to clean, so they need replacing when scarred. Many cooks keep a plastic or separate board for raw meat and a wood board for everything else.

Mapledale live edge solid wood cutting board with a handle holding blackberries, raspberries and crackers with cheese on the side
For Serving

From prep to the table

The Mapledale board with a handle carries fruit, cheese and bread from the counter to the table. A handle also makes it easy to hang.

How to choose

Everyday chopping

  • Hard maple or beech.
  • Thick and heavy enough not to slide.
  • End grain if budget allows.

Serving and charcuterie

  • Walnut, cherry or a live edge board.
  • A handle for carrying.
  • Light cutting only.

Low-maintenance

  • A dense closed-grain wood.
  • Oil monthly.
  • Hand wash, dry upright.

Grain direction matters too; see end grain vs edge grain cutting boards. For daily care, read how to clean and oil a wood cutting board.

Key Takeaway

Choose a dense, closed-grain hardwood in the middle of the hardness range: hard maple, beech, walnut and cherry are proven choices. Skip pine, open-grain red oak, very hard exotics and any board with a varnish or lacquer finish. Oil-finished wood is gentle on knives and lasts for years with simple care.

Woodfurnist Design Tip

Keep two boards: a thick one for daily chopping and a beautiful live edge board for serving. The serving board stays nicer for longer, and guests notice it.

Hosting this season? See our Christmas charcuterie board ideas.

A good board can double as holiday decor; see how in our Christmas kitchen decor ideas.

Frequently Asked Questions

What is the best wood for a cutting board?

Hard maple is the classic choice. Walnut, cherry and beech are also excellent closed-grain hardwoods.

What wood should not be used for a cutting board?

Soft or resinous woods like pine, open-grain woods like red oak, and very hard or irritating exotic species.

Is walnut good for a cutting board?

Yes. It is a little softer than maple, which makes it gentle on knives, and its dark color hides stains.

Is teak good for a cutting board?

It resists water very well, but its natural silica can dull knives faster than maple or walnut.

Is a wood or plastic cutting board better?

Both can be safe if cleaned well. Wood is gentler on knives; plastic can go in the dishwasher but needs replacing when deeply scarred.

What finish should a cutting board have?

A food-safe oil such as food-grade mineral oil or a board butter, never varnish or lacquer.

Editor's note: Janka figures are averages from The Wood Database; every board varies. Food-safety guidance is general; follow USDA food safety advice for raw meat and poultry. Product sizes and prices were checked on woodfurnist.com on November 11, 2026. Every piece is made to order in 7 to 10 business days, plus 5 to 7 business days for free US delivery; see our shipping policy.